narrow-pitch connectors axt5, 6 ordering information narrow-pitch, thin and slim connector for board-to-fpc connection narrow pitch (0.4 mm) connectors f4s series features 1. space-saving (3.6 mm widthwise) the required space is smaller than our f4 series (40-contact type): socket ?27% smaller, header ?38% smaller the small size contributes to the miniaturization of target equipment. * clips for preventing the solder joints from being removed 2. highly reliable has strong resistance to adverse environments. (see page 6 for details of the structure) note: if extra resistance to shock caused by dropping is required, we recommend using our previous f4 series. 3. the simple lock structure gives tactile feedback that ensures a superior mating/unmating operation feel. 4. gull-wing type terminals the gull-wing type terminals facilitate automatic mounting inspections. 5. connectors for inspection available connectors for inspection are available that are ideal for modular unit inspection and inspection in device assembly processes. applications compact portable devices ?ellular phones, dvc, digital cameras, etc socket header compliance with rohs directive clips (soldering terminal)* at the four corners clips (soldering terminal)* at the four corners pickup width: 0.8mm 10.50 (40 contacts) 9.80 (40 contacts) 3.60 2.60 header so cket simple lock structure narrow-pitch connectors f4s 1.0mm pcb reinforcing plate (with fpc) fpc reinforcing plate example of board-to-fpc connections before mating after mating the simple lock mechanism ensures that the connector clicks into position when it is inserted for reliable single-action insertion on the pcb. surface treatment (contact portion / terminal portion) 4: base: ni plating surface: au plating (for ni barrier available) 4: base: ni plating surface: au plating 5: narrow pitch connector f4s (0.4 mm pitch) socket 6: narrow pitch connector f4s (0.4 mm pitch) header mated height 1: for mated height 1.0 mm 2: for mated height 1.2 mm 1: for mated height 1.0 mm 2: for mated height 1.2 mm axt 4 number of contacts (2 digits) functions 2: without positioning bosses note: please note that models with a mated height of 1.0 mm (7th digit of part number is ?? and 1.2 mm (7th digit of part number is ?? are not compatible. panasonic-electric-works.net/ac
narrow-pitch connectors axt5, 6 product types notes: 1. order unit: for mass production: in 1-inner-box (1-reel) units samples for mounting check: in 50-connector units. please contact our sales of?e. samples: small lot orders are possible. please contact our sales of?e. 2. the above part numbers are for connectors without positioning bosses, which are standard. when ordering connectors with positioning bosses, please contact our sales of?e. 3. please contact us for connectors having a number of contacts other than those listed above. specifications 1. characteristics mated height number of contacts pa rt number pac king so cket header inner carton outer carton 1.0mm 10 axt510124 axt610124 3,000 pieces 6,000 pieces 12 axt512124 axt612124 14 axt514124 axt614124 16 axt516124 axt616124 18 axt518124 axt618124 20 axt520124 axt620124 22 axt522124 axt622124 24 axt524124 axt624124 26 axt526124 axt626124 28 axt528124 axt628124 30 axt530124 axt630124 32 axt532124 axt632124 34 axt534124 axt634124 36 axt536124 axt636124 38 axt538124 axt638124 40 axt540124 axt640124 42 axt542124 axt642124 44 axt544124 axt644124 46 axt546124 axt646124 48 axt548124 axt648124 50 axt550124 axt650124 54 axt554124 axt654124 60 axt560124 axt660124 64 axt564124 axt664124 70 axt570124 axt670124 80 axt580124 axt680124 1.2mm 30 axt530224 axt630224 40 axt540224 axt640224 50 axt550224 axt650224 80 axt580224 axt680224 item speci?ations conditions electrical characteristics rated current 0.3a/contact (max. 5 a at total contacts) rated voltage 60v ac/dc breakdown voltage 150v ac for 1 min. no short-circuiting or damage at a detection current of 1 ma when the speci?d voltage is applied for one minute. insulation resistance min. 1,000m ? (initial) using 250v dc megger (applied for 1 min.) contact resistance max. 90m ? based on the contact resistance measurement method speci?d by jis c 5402. mechanical characteristics composite insertion force max. 0.981n/contacts contacts (initial) composite removal force min. 0.165n/contacts contacts contact holding force (socket contact) min. 0.49n/contacts measuring the maximum force. as the contact is axially pull out. environmental characteristics ambient temperature ?5 c to +85 c no freezing at low temperatures. no dew condensation. soldering heat resistance peak temperature: 260 c or less (on the surface of the pc board around the connector terminals) infrared re?w soldering 300 c within 5 sec. 350 c within 3 sec. soldering iron storage temperature ?5 c to +85 c (product only) ?0 c to +50 c (emboss packing) no freezing at low temperatures. no dew condensation. thermal shock resistance (header and socket mated) 5 cycles, insulation resistance min. 100m ? , contact resistance max. 90m ? sequence 1. ?5 c, 30 minutes 2. ~ , max. 5 minutes 3. 85 c, 30 minutes 4. ~ , max. 5 minutes humidity resistance (header and socket mated) 120 hours, insulation resistance min. 100m ? , contact resistance max. 90m ? bath temperature 40 2 c, humidity 90 to 95% r.h. saltwater spray resistance (header and socket mated) 24 hours, insulation resistance min. 100m ? , contact resistance max. 90m ? bath temperature 35 2 c, saltwater concentration 5 1% h 2 s resistance (header and socket mated) 48 hours, contact resistance max. 90m ? bath temperature 40 2 c, gas concentration 3 1 ppm, humidity 75 to 80% r.h. lifetime characteristics insertion and removal life 50 times repeated insertion and removal speed of max. 200 times/ hours unit weight 50-contact type: socket: 0.05 g header: 0.03 g 0 ? 3 + 3 0 panasonic-electric-works.net/ac
narrow-pitch connectors axt5, 6 2. material and surface treatment dimensions (unit: mm) pa rt name material surface treatment molded portion lcp resin (ul94v-0) contact and post copper alloy contact portion: base: ni plating surface: au plating te r minal portion: base: ni plating surface: au plating (except the terminal tips) the socket terminals close to the portion to be soldered have nickel barriers (exposed ni ck el portions). metal clips: sockets: base: ni plating surface: pd+au ?sh plating (except the terminal tips) headers: base: ni plating surface: au plating (except the terminal tips) the cad data of the products with a cad data mark can be downloaded from: http://panasonic-electric-works.net/ac socket (mated height: 1.0 mm and 1.2 mm) te rm inal coplanarity 0.08 (contact and clips (soldering terminal)*) c0.15 a b 0.1 0.40 0.05 0.15 0.03 d (0.62) (0.62) 2.36 3.60 y note z note 0.80 (suction face) 3.00 0.30 0.03 c 0.1 3.60 2.00 0.45 (0.80) general tolerance: 0.2 note: since the clip (soldering terminal)* has a single-piece construction, sections y and z are electrically connected. dimension table (mm) number of contacts/ dimension a b c 10 4.5 1.6 3.4 12 4.9 2.0 3.8 14 5.3 2.4 4.2 16 5.7 2.8 4.6 18 6.1 3.2 5.0 20 6.5 3.6 5.4 22 6.9 4.0 5.8 24 7.3 4.4 6.2 26 7.7 4.8 6.6 28 8.1 5.2 7.0 30 8.5 5.6 7.4 32 8.9 6.0 7.8 34 9.3 6.4 8.2 36 9.7 6.8 8.6 38 10.1 7.2 9.0 40 10.5 7.6 9.4 42 10.9 8.0 9.8 44 11.3 8.4 10.2 46 11.7 8.8 10.6 48 12.1 9.2 11.0 50 12.5 9.6 11.4 54 13.3 10.4 12.2 60 14.5 11.6 13.4 64 15.3 12.4 14.2 70 16.5 13.6 15.4 80 18.5 15.6 17.4 cad data mated height/ dimension d 1.0mm 0.97 1.2mm 1.17 header (mated height: 1.0 mm and 1.2 mm) 0.15 0.03 c 0.1 a b 0.1 0.80 (suction face) 1.86 0.40 0.05 0.15 0.03 r0.15 d 2.60 1.68 (0.46) (0.48) 0.94 1.90 te rm inal coplanarity 0.08 (post and clips (soldering terminal)*) c0.13 c0.13 clip (soldering terminal)* clip (soldering terminal)* general tolerance: 0.2 dimension table (mm) number of contacts/ dimension a b c 10 3.8 1.6 3.2 12 4.2 2.0 3.6 14 4.6 2.4 4.0 16 5.0 2.8 4.4 18 5.4 3.2 4.8 20 5.8 3.6 5.2 22 6.2 4.0 5.6 24 6.6 4.4 6.0 26 7.0 4.8 6.4 28 7.4 5.2 6.8 30 7.8 5.6 7.2 32 8.2 6.0 7.6 34 8.6 6.4 8.0 36 9.0 6.8 8.4 38 9.4 7.2 8.8 40 9.8 7.6 9.2 42 10.2 8.0 9.6 44 10.6 8.4 10.0 46 11.0 8.8 10.4 48 11.4 9.2 10.8 50 11.8 9.6 11.2 54 12.6 10.4 12.0 60 13.8 11.6 13.2 64 14.6 12.4 14.0 70 15.8 13.6 15.2 80 17.8 15.6 17.2 cad data mated height/ dimension d 1.0mm 0.83 1.2mm 1.01 panasonic-electric-works.net/ac
narrow-pitch connectors axt5, 6 ?socket and header are mated mated height: 1.0 mm mated height: 1.2 mm embossed tape dimensions (unit: mm) (common to all sockets and headers) ?dimension table (unit: mm) ?connector orientation with respect to embossed tape feeding direction type/mated height number of contacts type of taping a b c d quantity per reel common for sockets and headers: 1.0mm, 1.2mm 24 or less tape i 16.0 7.5 17.4 3,000 26 to 70 tape i 24.0 11.5 25.4 3,000 80 tape ii 32.0 28.4 14.2 33.4 3,000 header so cket 1.00 0.15 header so cket 1.20 0.15 ?speci?ations for taping (in accordance with jis c 0806-1990. however, not applied to the mounting-hole pitch of some connectors.) tape i tape ii ?speci?ations for the plastic reel (in accordance with eiajet-7200b.) 1.75 c 8.0 a 0.3 4 2 1.5 dia. +0.1 0 leading direction after packaging 1.75 c 8.0 a 0.3 4 2 b 1.5 dia. +0.1 0 leading direction after packaging d 1 top cover tape taping reel embossed carrier tape embossed mounting-hole 380 dia. type direction of tape progress common for f4s socket header note: there is no indication on this product regarding top-bottom or left-right orientation. panasonic-electric-works.net/ac
narrow-pitch connectors axt5, 6 product types notes: 1. when placing an order, substitute the ? ? (asterisk) in the above part number with the number of contacts for the required connector. 2. the above part numbers are for connectors without positioning bosses, which are standard. when ordering connectors with positioning bosses, please contact our sales of?e. connector for inspection usage applications with 3,000 insertion and removal times narrow pitch connector f4s (0.4 mm pitches) for inspection usage speci?ations part no. speci?ations part no. socket without positioning bosses axt5e ?? 26 header without positioning bosses axt6e ?? 26 features 1. 3,000 insertion and removals (when as recommended) from the 50 insertion and removals of standard type, up to 3,000 insertion and removals (with recommended insertion and removal) are possible for use in inspection. ideal for inspection of module units and inspection during the device assembly process 2. same external dimensions and foot pattern as mated height 1.0mm standard type. since shape is the same as mated height 1.0mm standard type, inspection is possible without interfering with devices in the vicinity of standard connectors. 3. improved mating insertion and removal have become easier due to a reduction in the mating retention force required by the simple locking structure and also in the amount of force needed for insertion and removal. (we cannot warrant anything regarding mating retention.) socket header compliance with rohs directive table of produt types product name f4s for inspection ? : av ailable for sale 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 54 60 64 70 80 ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? notes: 1. please inquire about numbers of contacts other than those given above. 2. please inquire with us regarding delivery times. 3. please keep the minimum unit for ordering no less than 50 pieces per lot. 4. please inquire for further information. number of contacts panasonic-electric-works.net/ac
narrow-pitch connectors axt5, 6 notes 1. if extra resistance to drop impact is required, we recommend using our f4 series. 2. recommended pc board and metal mask patterns appropriate control of solder amount is required to minimize solder bridges and other defects for connectors with 0.4-mm or 0.5-mm pitch terminals, which require high-density mounting. refer to the right- hand drawing for recommended patterns. ?socket recommended pc board pattern (top view) recommended metal mask opening pattern metal mask thickness: when 150 m (terminal opening ratio: 48%) (metal-part opening ratio: 100%) recommended metal mask opening pattern metal mask thickness: when 120 m (terminal opening ratio: 60%) (metal-part opening ratio: 100%) ?header recommended pc board pattern (top view) recommended metal mask opening pattern metal mask thickness: when 150 m (terminal opening ratio: 48%) (metal-part opening ratio: 100%) recommended metal mask opening pattern metal mask thickness: when 120 m (terminal opening ratio: 60%) (metal-part opening ratio: 100%) : insulation area 0.90 0.03 0.70 0.03 0.23 0.03 0.40 0.03 1.80 0.03 (1.20) 2.36 0.03 4.20 0.03 (0.92) 0.90 0.01 0.70 0.01 0.20 0.01 0.40 0.01 4.20 0.01 1.80 0.01 (1.20) 2.98 0.01 4.00 0.01 (0.51) 0.20 0.01 0.90 0.01 0.70 0.01 0.40 0.01 4.20 0.01 1.80 0.01 2.74 0.01 4.00 0.01 (1.20) (0.63) 0.80 0.03 0.45 0.03 0.23 0.03 0.40 0.03 0.75 0.03 2.06 0.03 (0.655) 1.70 0.03 3.20 0.03 (0.75) max. 1.00 : insulation area 0.80 0.01 0.45 0.01 0.20 0.01 0.40 0.01 2.06 0.01 0.75 0.01 (0.655) 2.18 0.01 3.00 0.01 (0.41) 0.20 0.01 0.80 0.01 0.45 0.01 0.40 0.01 2.06 0.01 0.75 0.01 1.96 0.01 3.00 0.01 (0.655) (0.52) for other details, please verify with the product speci?ation sheets. panasonic-electric-works.net/ac
|
